Netis WF2710 AC750 Wireless Dual Band Router

In a crowded networking market, where many of the latest routers are north of $200 (or more), the Netis WF2710 comes in under $50. Is this white box a peewee wonder? Read on to find out!

The latest standard for networking gear is known as 802.11ac. Devices that conform to this standard offer Wifi that conforms to both the 2.4 Ghz, as well as the 5 Ghz standard. Most of the new networking gear that is being introduced, conforms to this. It offers the advantages of less interference on the 5 Ghz frequency, and faster speeds.

The only real downside of the 802.11ac devices is that not surprisingly they cost more than the previous stuff, the so-called Wireless-N. While one approach for the cost conscious is to purchase a previous generation device, the Netis WF2710 offers a way to get into an AC router, for a price that is even lower than some Wireless-N routers. It is currently available at NewEggfor $39.99.

Netis AC1200 Wireless Dual Band Gigabit Router

A wireless router is an important centerpiece to a home network, and forms the backbone of distributing the internet broadband connection.  The latest standard is the 802.11ac, which incorporates the older 802.11b/g/n standard that works off the 2.4 GHz frequency.  It also add additional frequency in the 5 GHz range, which is capable of even faster speeds.  The other advantage of the 5 GHz frequency is at least for now, there is less gear there, and hence less congestion and interference.

In order to take advantage of the 802.11ac, a new router is a prerequisite.  Today, we take a look at the Netis AC1200 Wireless Dual Band Gigabit Router which incorporates all the latest standards.  Netis is a company that makes a wide variety of networking gear.  This router currently retails for $89.99 on Amazon.

Dlink DIR-820L Redux

My Dlink DIR-820L after a few weeks turned my network into a total mess.  I was running 3 networks simultaneously, including an 802.11n on 2.4 GHz, a guest network on the same frequency, and an 802.11ac on the 5 GHz frequency.  For whatever reason, it worked for a time, and then I was in the situation where all my devices were having issues:

• Sony Bluray player that connected but was too slow to stream anything
• Android 2.3 phone that consistently disconnected from the WiFi
• Windows 8.1 tablet that could only connect to the 802.11ac network
• Windows 8.1 notebook that could only connect to the guest network

As the problems accumulated, it was time to call for another WiFi consult.  I nicely complained to them at the support center that all my previous routers had worked out of the box, and had never had so many issues.  My internet connection is a cable modem from Optimum, with speeds of 18/5.  I was getting this on the 802.11ac network when I ran it on Speedtest.net, but on the 802.11n the download speeds were down to 4-6.

They talked me through getting this back down to the basics with a factory reset, initiated with pushing the reset button on the bottom of the unit with a paper clip hold.  When rebooted, they also had me download the firmware right off the Dlink website.  Than we proceeded to name the 802.11n and 802.11ac with new unique names.  I also did not setup a guest network.

I had low expectations at this point, but to my pleasant surprise, the gear than connected.  In addition, the 2.4 GHz speeds now run at the same speed as the 5 GHz speeds.  I think that the guest network was stealing away bandwidth, but not 100% sure.

--Jonas

Dlink DIR-820L: How to Fix the WiFi Not Connecting Issue

 I have had several routers through the years, from a variety of manufacturers, including Belkin and Linksys.  Recently, my Linksys was acting up, and I was eager to upgrade to 802.11ac, the latest standard.  I found the Dlink DIR-820L on Amazon for the fair price of $69, and pulled the trigger.

The initial setup was simple, with the usual connection of ethernet wires.  The 820L has the standard plug for the internet from the modem, and then the 4 ethernet ports for wired connections- in my case I plug in directly a notebook, my Brother 2270DW laser printer as well as the adapter for a Powerline adapter (which is my backup network when the WiFi fails- more to come on this).  The 820L setup in about 10 minutes.  Based on something I had read elsewhere, I decided to name the new 820L as the same name as my previous router, and reuse the same password.  This move proved a seriously lousy idea, and I don't recommend it at all.

Next Gen WiFi

WiFi has been stuck for a while, as the standard went from "b" to "g" (with a detour to "a"), then seemingly endless "pre-n," and most recently "n."  Because it took so long to go from "pre-n" to "n," I think it made the true "n" somewhat anticlimactic.  The current "n" gear is certainly solid and stable (I use a Linksys E4200 these days), but it hardly feels next generation a year after it came into the house.

Hopefully, this should be changing soon.  The latest standard is designated as 802.11ac.  It operates on both the 2.4 GHz and 5 GHz portions of the spectrum, and is designed to prioritize streaming video.  While future iterations will offer faster speeds, Trendnet is debuting their new router, the TEW-800MB, that can hit a speedy 1.3 Gbps.  For the record, this handily trounces the current 802.11n gear that maxes out at 450 Mbps.

The product is expected in the Fall of 2012, for around $200.

[Tech PowerUp]